This gear came off my old car before i sold it.
It was removed as i replaced the box with a 4.11 box, hence i required a new diff and shafts to match.

Included is:

Gearbox:
3.545 final drive
RA gearset (the calculations appear to match, see below)
Its a 3.9 with a 1.1 drop (3.54)
The gearbox is missing two teeth on one gear (both were recovered), otherwise in good condition.
The bearings were replaced on this box a couple of years ago.
Comes with one complete casing, and a second casing with a broken half (if you want it)

Rear Diff:
3.54 rear diff
Not LSD
Internal Splined
There's nothing wrong with the rear diff as far as i am aware

Shafts:
2x rear shafts
Internally spline into the rear diff
There's nothing wrong with the rear shafts as far as im aware

Images:
This picture shows my calculations determining the gearset.
What i know: The car used to max out at around 240, and did around 3-3.5k rpm at 100kmh.
http://www.imagedump.com/index.cgi?pick=get&tp=480024

Parts: http://www.imagedump.com/index.cgi?pick=get&tp=480018
Box: http://www.imagedump.com/index.cgi?pick=get&tp=480019
2x broken teeth: http://www.imagedump.com/index.cgi?pick=get&tp=480020
Centre Diff: http://www.imagedump.com/index.cgi?pick=get&tp=480022
Centre Diff2: http://www.imagedump.com/index.cgi?pick=get&tp=480023
Internally Splined rear diff: http://www.imagedump.com/index.cgi?pick=get&tp=480027

$600 for the lot
PM or email wrx@arach.net.au

Cheers,
Brett