|
|
LinkBack | Thread Tools | Display Modes |
#12
|
||||
|
||||
Yep done already, I've set it to 2-3.5ms between 11-14v. That should be in the ball park?
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#13
|
||||
|
||||
yeah, i personally bump it up just a smidge,
over dwelling does cook the coils a bit, but it'll hopefully make up for slightly tardy packs
__________________
Long live the WRC |
#14
|
|||
|
|||
by the look of it the loom plugs in at the coil packs, i guess this means the other end was cut from the donor car?
|
#15
|
||||
|
||||
Revs pretty easily and smoothly to 8 now, must say. No stutter, no miss it seems. Thy pesky version 6 is pretty crisp on throttle too. Bloody thing is happy anywhere between 2 and 8k.
Brent.
__________________
* [REXPLOIT] - EJ207 2.2L build. Under assembly: * All Sling - No Bling: Member 002: * WRX Club of WA member / CAMS member / CAMS registered volunteer: [SIGPIC][/SIGPIC] |
#16
|
||||
|
||||
Quote:
Rob had Deutz plugs on the sub harnesses......I 'aint that cool, so I went with the KISS principal.....
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#17
|
||||
|
||||
Coils on Ebay (new & in Aus) $78 a piece.
COIL OVER PLUG SUBARU FORESTER IMPREZA WRX LIB 2L TURBO | eBay
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#18
|
||||
|
||||
previously when setup on the liberty I was using deutsch plugs to connect from the coil loom to the main motec loom on my harness, but since I pulled these out to go to a stronger ignition setup (LS2 Chev Coils) I re-used the deutsch connectors for the new setup, so as supplied to ross with the pins sitting there, he removed them and pinned up some standard narva plugs which are perfectly fine. Main thing is to make sure if you ever buy the coil packs to get the OEM plugs for the coils, the sub loom doesn't make any difference really
Really glad it all helped for Ross's application as I wasn't convinced the coil was the issue, but he has definitely proven it was with doing the conversion having instant results! Well done on the changeover Ross, as the sub-loom was setup for my car with 4 ignition outputs and Ross has converted it over to run wasted spark for a MY99 ECU. Great job all round dude!
__________________
Cheers Rob, [SIGPIC][/SIGPIC] PROTOTYPE - Race it, break it, fix it, REPEAT! Powered by COSWORTH... Sponsored by PROTOTYPE CONSULTING, ALLSTAR, NO LIMIT EVENTS |
#19
|
||||
|
||||
Quote:
/CSB. Brent.
__________________
* [REXPLOIT] - EJ207 2.2L build. Under assembly: * All Sling - No Bling: Member 002: * WRX Club of WA member / CAMS member / CAMS registered volunteer: [SIGPIC][/SIGPIC] |
#20
|
||||
|
||||
RS Liberty and pre 97 WRX can be easliy set up to use these coils as they have 4 ignition outputs already. You need to delete the ignition module and link the respective inputs to their output wires. It's a fairly straightforward process, simplifies the whole thing and gets rid of the troublesome early coil on plug set up. The late coils do not fit on RS Liberty rocker arm heads though, you need to have at least 94 WRX heads.
|
Tags |
9900, coil, conversion, cop, gc8, gd, on plug, pack, plug |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.perth-wrx.com/vb/mechanicals/42930-99-00-gc8-coil-pack-gd-coil-plug-conversion.html
|
||||
Posted By | For | Type | Date | |
Upgrade bobina y cables subaru - Electrnica - Urban Performance | This thread | Refback | 02-08-2012 01:27 PM |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wanted: 99 gc8 coil pack in good con | darkz | Wanted | 6 | 08-03-2012 08:36 AM |
Coil oiver spark plug pack. | Evilliot | Wanted | 5 | 06-02-2009 06:12 PM |