|
|
LinkBack | Thread Tools | Display Modes |
#161
|
||||
|
||||
So.... its finally finished, after getting messed around by Cosworth for almost 2 months with the cams. I have to thank Daniel from CarModsAus for sorting me some Kelford cams after Cossie didn't come through with the goods.
This is the Autronic IAT sensor installed, a definite nessecity when using speed/density so the ECU can accurately calculate air density, its also used for compensations and several failsafes. I wired the IAT sensor into the existing AFM harness. This allows me to switch it back to the AFM air temp sensor if I want to use the factory ECM later. Its simple to reconfigure the input in the Link for the Autronic sensor so it uses the data correctly. I used Deutche connectors which are among the best around. They're specified by Caterpillar for their mining equipment. Also used by WRC teams so I've been told. Connectors cost $10 a set, the tool for crimping the terminals cost $500! Lucky I was able to borrow one. Engine bay shot. Finally.. So build list reads: 207 short engine, Kelford 272 cams , 10.5mm lift, Ported heads, TGV's deleted, Cosworth intake, Perrin silicon turbo inlet, 550 blue injectors, J-style EL headers, Kinugawa TD06/20g, 3in turbo back, STI intercooler, Link G4 with AEM wideband wired in for logging/tuning. The Link is awesome, comparing it to the PossumLink is like another planet. Cold starts are factory like, I've got it to idle nicely even with the cams, cruise AFR's are sorted. I would say its almost as good as the factory ECM apart from knock control. Really, its that good, I would recommend it. A nice easy run in (600k's to go) and it will be all go! I'm hoping for for over 300hp, watch this space.
__________________
Its just the internet dude, its not real. F.B. Racing 01 WRX (STI badged) 2010 XR5 Focus 06 Impreza Hatch 2.0i |
#162
|
||||
|
||||
Awesome John! Was only thinking about this build the other day and how it was all going.
Congrates and i hope it pulls the figures you're after.
__________________
2016 Subaru Outback - Work Wagon 350NM of CVT Goodness Pit Crew, shit talker. |
#163
|
||||
|
||||
Been watching this thread for a while (kinda what I am looking to do soon: EJ207 short install) and have to say 10/10 and I hope the numbers and solid and I'm sure you will use it to it's full potential
__________________
MY01 JDM EVO VII - 230KW / 430NM @ 1.6BAR |
#164
|
|||
|
|||
Nice work John. If you have 550cc injectors, be ready to swap them if you plan on getting up to 300hp. My STI pinks were maxed out as in 100% duty cycle at 302hp ATH. This was at around 11.2 AFR
__________________
Cheers, Simon. |
#165
|
||||
|
||||
Quote:
Just an FYI for any one reading, the blue injectors in the later 2.5 WRX and STI are the same flow rates as the older STI pinks. Something to consider if you are going to upgrade your 2.0 injectors.
__________________
Its just the internet dude, its not real. F.B. Racing 01 WRX (STI badged) 2010 XR5 Focus 06 Impreza Hatch 2.0i |
#166
|
||||
|
||||
Very nice John!
__________________
Huge range of extinguisher brackets for cars! http://kap.industries/ |
#167
|
||||
|
||||
helis...
__________________
2000 WRX - Grip King 1997 Sileighty - Gate Monster |
#168
|
||||
|
||||
Hmmmm.....I know it's not even run-in yet.....but.....V-mount?
__________________
Its just the internet dude, its not real. F.B. Racing 01 WRX (STI badged) 2010 XR5 Focus 06 Impreza Hatch 2.0i |
#169
|
|||
|
|||
been watchin this closly, always re-read rossco's build too!!
im collecting all my 207 build kit tomorrow/wednesday would you happen to have torque settings for the build?? if so could you either pm or type it up if you dont mind?? |
#170
|
||||
|
||||
Cool build, Im keen to see what figures it gets, decent sized turbo in it and cams I think low 300's for sure which is an excellent result with a TMIC.
If/when you go for FMIC or V mount then it will really come alive.
__________________
K.E.R.S!!!1 |
Tags |
207, block, build, ej205, gettin, johns, limit, russ is a tough c*nt, slowly |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rossco's Engine Build | Rossco | Mechanicals | 543 | 21-12-2012 11:53 PM |
MattMY99's Hatch Build Thread | mattmy99 | Mechanicals | 202 | 29-06-2012 12:54 PM |
Build Number | RamWRC | General Subaru Discussion | 3 | 25-12-2010 08:19 PM |
EJ207 Cosworth build | Serbaru | Mechanicals | 17 | 29-09-2010 07:43 PM |
Rods, Crank and Slugs from a 207. | Elrico | For Sale | 5 | 21-07-2009 07:06 PM |