|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
97 (MY98) GC8 - Immobiliser hassles
Hey all,
Bought a 97 wrx from the auctions in adelaide. Unfortunately didnt have a key. Got a locksmith to cut me a key but he couldnt recode the transponder chip. It was coming up with a communications error. Got a local locksmith to try and his computer does the same. Something may be wrong with the obd port. Not 100% sure. Local subaru dealer is full of first year apprentices as it seems and they cant even tell me if they can fix it. Another guy said $1000 for a new key. I have a couple of questions. -Does anyone have any info/pinout/photo of their obd plug so i can see what might be wrong? - Worst case scenario, can you disable/bypass the stock immobiliser, so i can then get a new alarm and immobiliser fitted with the current key i have. Any advice would be great. Got my first WRX and can't drive it |
#2
|
||||
|
||||
Tow to a dealer and have the transponder coded.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] |
#3
|
|||
|
|||
Does the key you got cut have a transponder in it? Or is it just a metal blank?
If it had a transponder, take it to the dealer and have them code it Also someone correct me if I'm wrong but I though my99 was the first year with transponder? Could be wrong though using the Perth-WRX mobile app |
#4
|
||||
|
||||
Call A1 locksmith. got 2 keys & immobilizers with it all recoded for $800. they came out to me aswell. price might alter for that year of car. cant hurt to get a quote.
|
#5
|
|||
|
|||
Well it starts and then cuts out. So it does have an immobiliser.
Im not based in perth, so cant get to any decent locksmith who knows their stuff with subarus. Was hoping there might be a way to just disconnect/bypass the stock immobiliser so i can get the car going then just get a decent aftermarket alarm/immob for it. |
#6
|
||||
|
||||
What was I thinking - 97 didn't have a factory immob/transponder.
Your fuel pump relay is cactus buddy......the relay is bypassed when the fuel pump is primed for a second or three prior to cranking and whilst cranking it over with the key - your car will be dying at the point where the system 'hands over' the fuel pump load to the dead relay.
__________________
[CENTER][SIGPIC][/SIGPIC][/CENTER] [CENTER][COLOR=#ff0000]Built Ej207: Semi-closed RA Cases - Wiseco Forgies - Manley rods - BC 272 cams - GDA Heads - billet f/whl - Vi-pec - WbO2 - 800cc Yellow tops - TD05-20G - 409Hp ath @ 1.75bar on E85[/COLOR][/CENTER] Last edited by Rossco; 25-11-2013 at 11:58 AM. |
#7
|
|||
|
|||
Im sure it does. its build was like september 97.
Also has the immobiliser key light on the dash. Either flashing or solid when it cuts out. |
#8
|
||||
|
||||
Will need to goto a dealership to get the key recoded to the ecm/integ modual. There is a lock smith in myaree but not sure if he can coded
__________________
Marti Car: C Red S13 Silvia 2.3l 400+rwhp-SOLD Daily ae82 4age corolla (light mods)-Sold Daily:SWB GQ Patrol Will be a 03-04 STI next |
#9
|
||||
|
||||
Sept 97 will be a MY98. They were the first year with a transponder. Your car will have the white faced gauges and a centre glovebox on the dash, correct?
When you say it starts and then cuts out, does it run for about 5 seconds? Had that issue with my 98 when I first built it. Not sure if there is a way to bypass it at all but you can buy a matched key, barrel and ECM from a wrecked car and you should be right to go. |
#10
|
|||
|
|||
yeah correct. Its an my98. Has the center glovebox.
And yes, runs for 3 or so seconds, has a little blip in throttle then dies. Definately the immobiliser. I'll see how much a wreckers option is going to cost me. So all i need is the key, barrel, ecm? Are they not linked to the immobiliser unit ? Also does it have to be from an MY98? Thanks heaps |
Tags |
97, gc8, hassles, immobiliser, my98 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
97 my98 gc8 | CLARKIE | For Sale (Cars Only) | 1 | 03-12-2011 03:48 AM |
97 gc8 Caliper guide pin | Letchy | Mechanicals | 0 | 14-10-2011 07:04 PM |
what size could i go up to on my 97 GC8? | jakebliss | Cosmetic | 7 | 12-06-2011 07:18 AM |
WTD : late 97 GC8 Front grille. | Yussyswrx | Wanted | 1 | 01-09-2010 01:57 PM |
WTB: GC8 bits (the stuff sitting in your garage) | jEstEr? | Wanted | 1 | 30-12-2006 09:19 PM |