|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Gbox/diff/shafts
This gear came off my old car before i sold it.
It was removed as i replaced the box with a 4.11 box, hence i required a new diff and shafts to match. Included is: Gearbox: 3.545 final drive RA gearset (the calculations appear to match, see below) Its a 3.9 with a 1.1 drop (3.54) The gearbox is missing two teeth on one gear (both were recovered), otherwise in good condition. The bearings were replaced on this box a couple of years ago. Comes with one complete casing, and a second casing with a broken half (if you want it) Rear Diff: 3.54 rear diff Not LSD Internal Splined There's nothing wrong with the rear diff as far as i am aware Shafts: 2x rear shafts Internally spline into the rear diff There's nothing wrong with the rear shafts as far as im aware Images: This picture shows my calculations determining the gearset. What i know: The car used to max out at around 240, and did around 3-3.5k rpm at 100kmh. http://www.imagedump.com/index.cgi?pick=get&tp=480024 Parts: http://www.imagedump.com/index.cgi?pick=get&tp=480018 Box: http://www.imagedump.com/index.cgi?pick=get&tp=480019 2x broken teeth: http://www.imagedump.com/index.cgi?pick=get&tp=480020 Centre Diff: http://www.imagedump.com/index.cgi?pick=get&tp=480022 Centre Diff2: http://www.imagedump.com/index.cgi?pick=get&tp=480023 Internally Splined rear diff: http://www.imagedump.com/index.cgi?pick=get&tp=480027 $600 for the lot PM or email wrx@arach.net.au Cheers, Brett Last edited by Smokey; 26-12-2006 at 04:53 PM. |
#2
|
||||
|
||||
up!
|
#3
|
||||
|
||||
bump
|
|
|