|
|
LinkBack | Thread Tools | Display Modes |
#91
|
|||
|
|||
It was a few years back, I know my mate did put some video on youtube but not sure if it's still there, I'll have to ask him if he's still got the video saved somewhere when he gets back from overseas next week as it's pretty funny watching him nearly fall off the back when it kicks in
Yeah no probs, always happy to help
__________________
Remove hail dents yourself, fast and easy - $25 for a kit. PM me for details [SIGPIC][/SIGPIC] |
#92
|
|||
|
|||
Just a quick update before I head down to Bunno to pick up a stranded friend. Direct Port NOS foggers will arrive tomorrow so I'm on the lookout for an STI intake manifold or even an aftermarket one to mount them onto so I have a spare one in the event of needing to take them off again.
Bought a USB to CAN adaptor for the Motec last week and have been doing my research. Last night I decided to download the current ECU config in an attempt to try and sort out the erratic idle when cold and noticed that the poor car has been setup so badly it defies all logic. Running rich would be an understatement, no wonder I've only been getting 200km max out of a tank of fuel. So eased off on the fuel, gave it some realistic injection timing (not 100ms to 400ms with nothing in between) and wouldn't you know it runs so much smoother. Then increased timing by 0.5 degrees across the board and increased idle timing from 5 to 12 degrees and it's like a totally different car, so much more response and power down low where it badly needed it. Crazy thing is that it's still running mega rich and timing is so conservative it's a joke. There is still so much power to be tuned out of this engine, problem is going to be finding someone I can trust that will actually do it rather than just take my money and do stuff all like what happened when it was meant to have been tuned a few weeks back. I'll still get ASG to do the NOS & turbo & extractors but I think they are too busy to give the proper attention a car like this needs. Anyone know any good Motec tuners (that aren't snowed under with work)?
__________________
Remove hail dents yourself, fast and easy - $25 for a kit. PM me for details [SIGPIC][/SIGPIC] |
#93
|
||||
|
||||
GTi performance in Bibra Lake.
Simon 9434 3675.
__________________
Balls. |
#94
|
||||
|
||||
Good:
The lads @ ASG. Simon @ GTi. (Tunes for TF as well). Tony @ TFM. (Can tune Motec - but generally hand balls to Simon). X-Speed for memory can (and have their own dyno). Although primarily tune Nissans. That said, they do have engine/tuning expertise in house. **EDIT - Also, I think Joe uses/used a dude called Glen Baker or something?? PM Balistic and ask him regarding feedback. I havent had any dealings with him, but I think Joe said he was good** Bad: MMS. TSWR. (West Racing). Intune. NOW, before the workshop band-wagon juggernaut fires into life... This is in relation to MOTEC tuning, and of the above list, I have first hand experience with 4. Brent.
__________________
* [REXPLOIT] - EJ207 2.2L build. Under assembly: * All Sling - No Bling: Member 002: * WRX Club of WA member / CAMS member / CAMS registered volunteer: [SIGPIC][/SIGPIC] Last edited by [REXPLOIT]; 07-04-2010 at 07:00 PM. |
#95
|
|||
|
|||
Awesome, thanks for that. Will give Simon at GTI a call in the next few days.
Direct port NOS kit arrived today, 150hp shot of NOS goodness is only days away now
__________________
Remove hail dents yourself, fast and easy - $25 for a kit. PM me for details [SIGPIC][/SIGPIC] |
#96
|
|||
|
|||
It lives again! Engine completely rebuilt by Maximum Motorsport with all Cosworth internals apart from main bearings which are King brand as there was/is a shortage of Cosworth/ACL bearings. The block has been properly converted to fully closed deck and the workmanship was out of this world unlike the abortion of an attempt that was done on it previously. I had to replace the radiator as the last one was damaged beyond repair when the head gasket gave way.
Main differences I've noticed so far are:
Let the good times roll (well at least until I run out of money and can't afford to put petrol in it anymore lol)....
__________________
Remove hail dents yourself, fast and easy - $25 for a kit. PM me for details [SIGPIC][/SIGPIC] |
#97
|
||||
|
||||
Awesome stuff Darren, should bring it down to the ozzy park subaru x pwrx night next week!
__________________
221.7KW-ATW 498.5NM MMS ROLLER DYNO & BUILT BY STi NINJAS, BUILD #318/600 EBISU SUBARU, SHIBUYA-KU TOKYO |
#99
|
||||
|
||||
soooo whats the plans for its use and abuse Darren...road car is clearly not on the cards? as Wayne said bring it down on wednesday night..boys will be keen to see and here the Givewai II
__________________
Funny looking German Subaru |
#100
|
||||
|
||||
Sweet Quick build for MMS!!
|
Tags |
black, budgie, givewai |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Black R35 GTR | pete gopal | Non-WRX Discussion | 55 | 07-06-2009 01:04 PM |
FS: Black N95 8gb | klass8wrx | For Sale | 0 | 15-02-2009 10:05 PM |
Yet another Black Pig | MKVIGTI | Your Driveway | 8 | 27-10-2008 12:01 AM |
Black 08 WRX | perthzed | General Subaru Discussion | 6 | 21-10-2007 06:49 PM |
Avc R Neo in Black | TypeRstiV5 | Wanted | 0 | 24-01-2007 03:36 PM |